%20copy.png)
ALL PROFESSIONAL REMODELING GROUP
GAF MASTER ELITE ROOFING CONTRACTORS
Trusted Replacement Windows in Cedar Grove, NJ
All Professional Remodeling Group provides window replacement in Cedar Grove, NJ from our office at 80 Lakewood Avenue. We replace drafty, fogged, and rotted windows with Pella and Andersen units, and our free estimate gives you a price for your specific openings.
What Shapes the Cost of Your Window Replacement
Window prices vary more by opening than by house. These factors move a quote up or down.
Insert or full frame. Insert units reuse the existing frame and trim, so they cost less than a tear-out to the rough opening.
Frame material. Vinyl usually costs the least, while fiberglass and wood with exterior cladding cost more.
Style and size. Bay and bow units, oversized picture windows, and custom shapes cost more than standard double-hung windows.
Glass package. Low-E coatings and argon-filled insulated glass add to the price and cut heat loss in winter.
Repairs behind the old window. Rotted sills or framing add carpentry before the new unit goes in.
Trim work. New interior casing or exterior trim that matches your siding adds labor.
The estimate visit turns these factors into a price for each of your windows, so you can compare options before you commit.
Window Replacement in Cedar Grove, NJ: What Installers Find in Postwar Homes
Much of the township's housing went up during the building boom of the 1950s and 1960s. Homes from that era tend to show the same problems once the old windows come out.
Fogged glass from an earlier replacement. Insulated glass from a previous round of replacement windows loses its seal with age and clouds between the panes.
Aluminum storm windows over wood sashes. Combination storms from that period hold moisture against the wood behind them, and they come off before the new unit goes in.
Rot hiding under paint. Sills and lower sash rails often look solid until someone probes them, so the frame needs a hands-on check before you choose insert or full frame.
Painted shut or dropping sashes. Layers of paint and worn balances make older double-hung windows stick or slide down on their own.
Openings out of square. Decades of settling leave many openings slightly racked, which custom sizing and careful shimming correct.
Lead paint on original trim. Federal EPA rules require certified renovators to use lead-safe work practices when they replace windows in any home built before 1978, including plastic containment and HEPA vacuum cleanup.
Insert or Full Frame Replacement for Cedar Grove Homes
Two installation methods cover nearly every job. The condition of the existing frame decides which one fits your house.
Insert Replacement Windows
An insert unit fits inside the existing frame once the old sashes and balances come out. It keeps interior trim and plaster intact and suits frames that are still square, dry, and solid.
Full Frame Replacement
Full frame replacement strips the window down to the rough opening. Installers choose it when the frame or sill has rot, when water has reached the framing, or when you want a different size or style.
Choosing Window Styles and Frame Materials
Pella and Andersen both build replacement windows in several styles and frame materials. Our window replacement services page covers the full lineup, and the tables below show where each option fits best.
Which Window Style Fits Each Room
Most homes need two or three styles, matched to how each room gets used.
Room or Opening
Style That Fits
Why It Works
Bedrooms and living rooms in postwar homes
Double-hung
Keeps the original proportions and tilts in for cleaning
Over a kitchen sink
Casement or awning
A crank is easier to reach across a counter than a sash you lift
Basements
Awning or slider
Fits short openings, and an awning can stay open in light rain
Living room focal wall
Bay, bow or picture
Adds the most glass and natural light
Wide, short openings beside a deck or walkway
Slider
Opens without swinging into the path
Comparing Replacement Window Frame Materials
Frame material decides most of the upkeep and much of the price.
Frame Material
Upkeep
What It Offers
Vinyl
Low, never needs paint
Usually the lowest cost option, with a wide range of sizes and colors
Fiberglass
Low, can be painted
Stays stable through hot and cold swings, so seals and joints hold their shape
Wood with exterior cladding
Moderate inside, low outside
A real wood interior with a weather-resistant shell outside
How Our Window Installation Process Works
A clean installation protects the wall around the window as much as the window itself. Here is how a typical project moves from the estimate to final cleanup.
1
Estimate visit. We measure each opening, check frames and sills, and walk you through styles, glass, and pricing.
2
Custom order. The manufacturer builds each window to the measured size of its opening, and lead times vary by brand and product line.
3
Removal and prep. The crew sets up protective coverings and removes the old storms, sashes, or frame. Soft or rotted framing needs repair before the new unit goes in.
4
Setting and sealing. Installers level, shim, and fasten the new window, fill the gap with low-expansion foam, and seal the exterior perimeter against water.
5
Trim and cleanup. Interior and exterior trim go back on, the crew cleans the work area, and you can add a matching entry door from our doors and windows lineup.
Why Homeowners Choose All Professional Remodeling Group
We have served the township since 1996, and our team works as a roofing contractor in Cedar Grove and installs windows, doors, siding, and skylights. One call covers the whole exterior.
Registered and accredited. We hold New Jersey Home Improvement Contractor registration #13VH04408400 and have been a BBB Accredited Business since 2003, with an A+ rating.
Owner on the job. Owner Maciej Michalski works hands-on with the crew, so the person who quotes your windows stays connected to the team installing them.
Roof and windows together. Many customers call about a roof and update windows or siding at the same time, and we handle roof replacement in Cedar Grove when the roof is due.
Financing available. Our financing lets you replace every window at once or phase the project room by room.
Cedar Grove Neighborhoods and Nearby Towns We Serve
We replace windows in every part of the township, from the North End past Fairview Avenue to the South End near the Verona border. That includes Park Ridge Estates, the business district along Pompton Avenue, and the Lindsley and Overbrook areas.
Our crews also work in the neighboring Essex County towns of Verona, North Caldwell, and Montclair, including Upper Montclair, along with Little Falls in Passaic County.
Window Replacement Questions From Cedar Grove Homeowners
Here are straight answers to common questions about replacing windows in the township.
Do I need a permit to replace windows in Cedar Grove?
Usually not. The New Jersey Uniform Construction Code treats a window replaced in the same opening as ordinary maintenance when the dimensions and framing stay unchanged. That covers most insert and full frame jobs, so you can schedule the work without filing anything with the township.
Does a larger window or a new opening need township approval?
Yes. Enlarging an opening, cutting a new one, or changing the framing requires a construction permit from the township before work starts. Bedroom egress windows also must keep at least the clear opening they had before, so a smaller replacement unit is not an option in those rooms.
How long does window replacement take?
Install time depends on the method and the number of openings. Andersen's own installation guidance budgets at least four to six hours per ground floor window for a full frame replacement done by a homeowner, and insert windows take less. The longer wait usually comes before install day, while the manufacturer builds custom units to your measurements.
Can windows be replaced in a New Jersey winter?
Window replacement can go ahead in cold weather. Installers usually work one opening at a time, so each one stays open only briefly while the rest of the house stays closed. Sealants and foams have temperature limits for curing, so a deep cold snap can push the schedule back a few days.
Should I replace all my windows at once?
Not necessarily. Replacing every window in one project often lowers the cost per opening, since setup and finish work happen once. Many homeowners start with the worst windows, such as fogged units or rotted sills on the weather side, and finish the rest later in the same style so the house still matches.
Schedule your free window estimate with our local team.
All Professional Remodeling Group
Address: 80 Lakewood Ave, Cedar Grove, NJ 07009
Phone: (973) 857-9449
Email: info@roofingpronj.com
NJ HIC Registration: #13VH04408400